Shandong Xinkaite Bearing Co.,Ltd.
Unified Social Credit Code: 9137 1525MA3C 5428XP
Production Department
Address: Xu Village Industrial Garden, Gan Town, Guan County, Shandong
Tel: +86 635 5638235
Fax: +86 635 5638808
Mobile: +86 15563545668
Service Hotline: 4000 305204 Sales Department
Address: 314 Puli Mansion, Beixiaoxinzhuang West Street, Jinan City, Shandong
Tel: +86 15688862750
Fax: +86 531 87901699
WhatsApp: +86 15688862750
Skype: live:XinKaite
Email: xkte@xinkaite.com
HDPE roller uses life cycle extension
Clicks:2405 Date:11-14
1, the installation of bearings
Whether the bearing is installed correctly affects the accuracy, life and performance. Therefore, the design and assembly department for the installation of bearings should be fully studied. Hope to install according to the operation standard. Items of job standards are usually as follows:
(1) cleaning bearing and bearing related components
(2) check the size and finish machining of the related parts
(3) installation
(4) inspection after installation of bearings
(5) supply lubricant
2. Aligning and straightening
After the bearing is installed, if the alignment is not carefully adjusted, the bearing may cause additional load, friction and vibration. These may accelerate fatigue and reduce the service life of bearings, and may damage the service life of other machine parts. In addition, increased vibration and friction may greatly increase energy consumption and premature failure risk.
3. Basic condition monitoring
During the service period, the basic external conditions of bearing operation should be monitored, such as temperature, vibration and noise measurement, etc.. These regular checks for early detection of potential problems and prevent unexpected machine halt, make the production plan can be achieved, improve plant productivity and efficiency.
4, lubrication again
In the process of operation, the bearing requires the correct lubrication again, perfect its performance. The methods of bearing lubrication are divided into grease lubrication and oil lubrication. In order to make the bearing work well, first of all, it is necessary to choose the lubrication method which is suitable for the use and the purpose. If only lubrication is considered, the lubricity of oil lubrication is predominant. But grease lubrication has the ability to simplify the structure around the bearings.
5. Unload
When the bearing will reach its final service life, it should be replaced. Although the bearings can no longer be used, but correctly remove the original bearing, replace new bearing, bearing on the new extension of the service life can play a good role in promoting. First of all, the use of appropriate methods to remove the tool will help prevent damage to other components, machine second, incorrect unloading technology may cause harm to the operator.
